重力匹配导航的影响模式分析

从重力场匹配导航的改进TERCOM算法入手,针对采样长度、采样间隔以及重力测量误差对匹配结果的影响进行了系统分析,并在此基础上利用海洋年度重力测量数据设计了准实时仿真试验,结果表明:(1)采样长度对匹配结果有重要的影响,采样长度与重力基准图的分辨率比值在10~20之间时,能够获得较好的匹配效果;(2)适当增加采样间隔可以在一定程度上提高匹配的整体精度,但增加了匹配失效的风险,实际应用中采样间隔以2~4 min为宜;(3)重力测量白噪声误差对匹配结果影响相对较大,过大的误差将不能得到有效匹配,水下重力测量误差最好能控制在2 mGal以内。     

两相颗粒多孔材料导热系数研究

对固-气两相颗粒多孔材料导热系数的预测,尚未见以实验数据对其各预测模型进行分析及验证其准确度的相关文献。本文利用断电热线法测定石英砂、碳化硅、工程沙以及煤灰的导热系数;将模型预测结果与实验数据进行对比分析,结果表明,Kunii and Smith模型误差小;考虑孔隙率的影响,利用实测数据对Kunii and Smith模型进行修正,给出新的预测模型;通过与国外学者给出的实测导热系数的对比,验证了本文给出的修正模型的准确性。     

基于MATLAB的非线性振动系统临界阻尼的研究

用MATLAB研究了非线性振动系统临界阻尼的性质,提出了非线性振动系统临界阻尼的计算公式和临界阻尼状态下系统的运动方程,并与数值解进行了比较.     

非金属掺杂改性g-C3N4光催化降解水中有机污染物的研究进展

近年来，石墨相氮化碳(g-C₃N₄)以其合适的带隙宽度、丰富的活性位点和成本低廉等优点，成为新兴的可见光响应非金属光催化剂，被广泛应用于光催化降解有机污染物领域。然而，纯g-C₃N₄对可见光的吸收效率较低且光生电子和空穴复合速率快，导致其光催化活性处于较低水平。基于g-C₃N₄的非金属特性，通过非金属掺杂可以有效提高g-C₃N₄的光催化性能，引起了学者们的广泛关注。本文介绍了目前非金属掺杂g-C₃N₄复合材料常见的制备方法，着重归纳了不同类型的非金属掺杂g-C₃N₄光催化降解水中有机污染物的相关研究进展，探讨其作为光催化剂在可见光条件下降解有机污染物的相关机理。最后，提出目前g-C₃N₄基复合材料在光催化降解水中有机污染物中所面临的挑战，旨在为非金属掺杂g-C₃...     

一类具两条不连续相交线的平面系统的闭轨

研究了一类具两条不连续相交线的平面系统的闭轨.利用微分包含理论和点变换的方法,获得了一些有趣的结果,包括滑模解,同宿解和闭轨的存在性.同时给出了闭轨存在的必要条件.     

Microstructure change in deuterium implanted CLAM steel induced by electron irradiation

As Reduced Activation Ferritic/Martensitic (RAFM) steel is considered the primary candidate for use as a structural material in fusion power reactors,many countries are developing different kinds of RAFM.China is developing new CLAM (China Low Activation Martensitic) steel.The study investigates microstructural changes in CLAM steel implanted with deuterium ions induced by 1250 keV electron irradiation from R.T.to 873 K,and observes both the growth and shrinkage of the defect clusters produced by deuterium ...     

Magnetization switching modes in nanopillar spin valve under the external field

The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the current density exceeds a threshold.By analyzing precessional trajectories,evolutions of domain walls and magnetization switching times under the perpendicular magnetic field,there are two different magnetization switching modes:nucleation and domain wall motion reversal;uniform magnetization ...     

利用瞬态热栅技术研究Sr2FeMoO6的热扩散系数及其温度效应

为研究Sr2FeMoO6的热扩散系数及其温度效应,利用瞬态热栅法研究了不同温度下Sr2FeMoO6热扩散系数变化,发现在温度300～360 K范围内,Sr2FeMoO6热扩散系数随着温度升高缓慢减小;在居里温度Tc～380 K附近,热扩散系数剧烈下降;在温度400～450 K范围内,热扩散系数随着温度升高基本保持不变....     

On the uniqueness and sensitivity issues in determining the elastic and plastic properties of power-law hardening materials through sharp and spherical indentation

A systematic study of the uniqueness, reversibility and sensitivity issues associated with seven indentation-based methods of property extraction demonstrates that: (i) The indentation algorithms generally identify the elastic and plastic properties of materials uniquely for most materials. (ii) The indentation forward algorithms (wherein the indention responses are determined from the elastic and plastic properties of the indented materials) and the reverse algorithms (wherein the elastic and the plastic properties of materials are extracted from the indentation responses) are distinct for each indentation method and are internally consistent in that the differences in the elastic and plastic properties determined through the reverse analysis and the ‘true’ material properties are generally small for a large number of materials, for each of the seven methods. (iii) While the differences in the indentation response parameters predicted by each of the seven indentation methods (for a particular material) could be small, there could be considerable dispersion in the elastic and plastic properties predicted by the reverse algorithms of the seven methods (for a particular set of indentation response parameters). (iv) In the forward analysis, small uncertainties in the elasto-plastic properties lead to small uncertainties in the predictions of the indentation response of materials. The sensitivity distribution is generally heterogeneous and symmetric across positive and negative variations in the material elasto-plastic properties. (v) In the reverse analysis, the elastic modulus exhibits low sensitivity, while the yield strength and the strain-hardening exponent generally exhibit high sensitivity to uncertainties in the indentation response parameters. The sensitivity distribution is heterogeneous and asymmetric across positive and negative variations in the indentation response parameters. (vi) The representative stresses are fairly robust to uncertainties in the indentation response parameters. Consequently, dual sharp and spherical indentation methods, which identify multiple representative stresses, exhibit reduced sensitivity in the determination of the plastic properties.     

Spectral tuning of InGaAs/GaAs quantum dot infrared photodetectors with bandpass guided‐mode resonance filters

Quantum dot infrared photodetectors can be coupled with micro‐structured filters to create narrowband sensors. Guided‐mode resonance filters based on a high‐index dielectric slab can exhibit bandpass characteristics that are suitable for monolithic integration with focal‐plane arrays. Here, patterned Ge filters were integrated with InGaAs/GaAs quantum dot detectors to linearly tune their 77 K photoresponse peaks from 5.6 µm to 6.2 µm. The dark current was not influenced by these filters but the ability to narrow the photoresponse linewidth was limited by substrate scattering, which is often encountered with front‐side illumination architectures. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)